Page 10
7.4
Assembling the microscope
7.4.1 B-292 / B-292PLI / B-293 / B-293PLI
1.
Remove the dust cap from the microscope frame
and from the bottom of the observation head.
2.
Insert the optical head above the stand and
tighten the screw. (Fig. 1)
•
Hold the head with one hand during the lo-
cking in order to avoid that the head falls.
3.
Insert both eyepieces into the tubes of the optical
head. (Fig. 2)
4.
Insert the power supply jack in the socket placed
at the rear side of the microscope. (Fig. 3)
Only for trinocular head
Unscrew the protection cap mounted on the photo
port and screw the photo tube. (Fig. 4)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
