Page 25
•
Pull the battery holder toward yourself, in order to extract it.
•
Remove the two-poles connector from the battery-holder:
•
Remove the 6 batteries inside the holder and replace them with the new one
(pay attention
to the correct polarity of each battery)
.
•
Reconnect the two-poles connector and replace the battery holder inside the microscope.
•
Close the back plastic cover with the four screws.
Please note:
Use ONLY this type of battery: AA NiMH 1.2V, capacity at least 2500mAh.
Respect your local regulation for the disposal of nickel-metal hydride batteries.
7.0 USING THE RECHARGEABLE BATTERIES
