background image

Page 3

Warning

This microscope is a scientific precision instrument designed to last for many years with a minimum of mainte

-

nance. It is built to high optical and mechanical standards and to withstand daily use. We remind you that this 

manual contains important information on safety and maintenance, and that it must therefore be made acces

-

sible to the instrument users. We decline any responsibility deriving from incorrect instrument use uses that does 

not comply with this manual.

Symbols and conventions

The following chart is an illustrated glossary of the symbols that are used in this manual.

CAUTION

 

This symbol indicates a potential risk and alerts you to proceed with caution.

ELECTRICAL SHOCK

This symbol indicates a risk of electrical shock.

Safety Information

 

 

Avoiding Electrical Shock   

Before plugging in the power supply, make sure that the supplying voltage of your region matches with the 

operation voltage of the equipment and that the lamp switch is in off position. Users should observe all safety 

regulations of the region. The equipment has acquired the CE safety label. However, users have full responsibil

-

ity to use this equipment safely. Please follow the guidelines below, and read this manual in its entirety to ensure 

safe operation of the unit.

Intended use

For research and teaching use only. Not intended for any animal or human therapeutic or diagnostic use.

Summary of Contents for B-500ASB















Reviews: