Page 7
Mount the stage: lower the
support using the coarse
focus knob, then place the
stage and firmly tighten the
lock screw
①
. (Fig.4)
Insert both eyepieces into
the tubes of the optical head.
(Fig.2)
Insert the condenser under
the stage: position until it is
well inserted into its holder
(under the condenser there is
a pin that must fully enter the
guide of the holder). (Fig. 3)
Screw each objective into
the thread of the nosepiece,
in order of magnification.
(Fig.5)
Fig.2
Fig.3
Fig.4
Fig.5
