background image

 

 

4

Optika 

stereo-microscope 

LAB-1 / LAB-2 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Cleaning and care of the microscope 

Changing the bulb 

Before changing the bulb, make sure that the power switch is off and the Power cord has been 
disconnected from the main supply. 

For Incident light, unscrew the lamp collector piece out, remove the old light bulb from the socket, and 
carefully plug the new bulb in, screw the collector piece back after changing the bulb. 
For transmitted light, remove the stage glass plate by pushing down its rear side, and move the old bulb 
from the socket and carefully plug the new bulb in. 
Never touch the glass surface of the bulb with naked hand, any grease stain brought onto the bulb by the 
naked hand will negatively affect the heat dissipation, and thus, greatly shorten the life span of the bulb. 
Clean the bulb surface with Ryf Lens Cleaner or alcohol and tissue if the user has touched the bulb 
surface accidentally. 

Cleaning 

lf dust is found on the optical surface, try to remove by air blower or better with canned air (Ryf cleaning 
Set). 
For fingerprint, grease stain or dust which cannot be removed by the air blower possible methods are 
recommended: 

  To breathe lightly on the glass surface and wipe with a clean piece of cloth, lens paper or cotton 

swab.  

  Please notice that small cotton fiber may be left onto the lens surface if cotton swab is used. 

  Use a cotton swab or lens paper dip with a small amount of absolute alcohol (or better with Ryf 

cleaning Set) and clean the lens surface carefully. No other aggressive solvents should be used. 

  In no circumstances should the user clean any lens surface with dry cotton swab, cloth or lens 

paper. This will scratch the lens surface causing irreparable damage.  

  Water is not recommended fop cleaning of lens as it will leave some water stain on the lens 

surface and if water residue is left on the lens, fungus can grow causing irreparable damage. 

 

 

Optional accessories  

 

ST-001

 

WF5x/22mm eyepiece pair

 

ST-002

 

WF10x/20mm eyepiece pair

 

ST-003

 

WF15x/15mm eyepiece pair

 

ST-004

 

WF20x/13mm eyepiece pair

 

ST-005 

WF10x/20 mm micrometric eyepiece

 

ST-023 

Additional 0,5x lens 

 

ST-024 

Additional 1,5x lens 

 

 

Reviews: