6
Day/Clock
SU MO TU WE TH FR SA
AM
Indicator Symbol
STEP 2: SET THE WATERING DAYS
When shipped from the factory the timer is programmed
to water every day.
When setting the days to water, you can select specific
days of the week (i.e. MO, TU, etc.), or water on interval
of days (i.e. every third day) or water on a PRESET
schedule of (MO, WE, FR) or (TU, TH, SA).
A: WATERING ON SELECTED, SPECIFIC DAYS OF
THE WEEK
1.
Turn the dial until it points to the Water Day position.
If you choose to select your watering days, continue
on to A-2. If you choose to water by interval days, pro-
ceed to step B-2.
2.
The day indicator will be shown below SU and On or
Off will be flashing in the display.
3.
If the display is correct, press the
Û
button to go to
the next day, or press the
Ý
or
Þ
arrow button to
change to the correct setting, then press the
Û
button
to go to the next day.
4.
At this time, the Monday indicator symbol will be on
and the word On or OFF will be flashing in the dis-
play. Repeat step A-3 to continue on through the re-
mainder of the week setting the days of the week to
be ON (days to water) or OFF (days to not water).
Water Day
SU MO TU WE TH FR SA
STEP 1: SETTING CURRENT DAY AND TIME
TURN DIAL TO Day/Clock POSITION
1.
An indicator symbol will blink under SU. Use the
Ý
or
Þ
arrow button to move the blinking symbol under the
current day. Press the
Û
button to confirm the correct
setting.
2.
The hour numbers will now be flashing. Use the
Ý
or
Þ
arrow button to adjust the hour number to the cur-
rent hour. Press the
Û
button to confirm the correct
setting. Be sure AM or PM is properly showing.
3.
The minute numbers will now be flashing. Use the
Ý
or
Þ
arrow button to adjust the minute number to the
current minute. Press the
Û
button to confirm that the
current settings are correct. (
NOTE:
If further editing
of the current time is needed press the
Û
button to
repeat the setting process.)
4.
Return dial to Auto.
PROGRAMMING THE PC-306
