Optima PC-306, Owner'S Manual

8

STEP 3: SET THE WATERING START TIMES

When shipped from the factory the timer has a default
program with an 8 a.m. start time once a day, everyday.

1

.

Turn the dial to the Start Time position.

2.

At this point the "A" indicator symbol will be on, and the

start time will be displayed (default is 8:00 a.m.). The
hour numbers will be blinking.

3.

If the time is correct press the 

Û

 button and go on to

setting the next start time or press the 

Ý

 or 

Þ

 button to

set start time to the correct hour. (

NOTE:

 The clock will

only start on the hour.) Once the Start Time is correct,
press the 

Û

 button to set the next Start Time.

4.

At this point the "B" indicator symbol will be on, the start

time will be displayed, and either the hour number will
be blinking or the word OFF will be blinking.

5.

If you do not want a second cycle start for the program

leave the OFF blinking, and turn the dial to the Auto po-
sition or the next programming function. If you do want
a second cycle start, then use the 

Ý

 or 

Þ

 arrow button

to set the second or "B" Start Time to the hour you de-
sire the cycle to start.

6.

If the time is correct press the 

Û

 button and go on to

setting the next start time ("C").

7.

At this point the START indicator will be on (e.g. A, B or

C), the start time will be on. The hour number will be
blinking or the word OFF will be blinking.

8.

If you do not want a third cycle start for the program

leave the OFF blinking and turn the dial to the Auto po-
sition or the next programming function. If you do want
a third cycle then use the 

Ý

 or 

Þ

 arrow button to set the

third or "C" Start Time to the hour you desire the cycle
to start.
(

NOTE:

 To return to the 1st Start Time ("A") you will

need to press the 

Û

 key to confirm your program.)

9.

Turn the dial to the Auto position or the next program-

ming function.

STEP 4: SET THE WATER TIME FOR EACH ZONE

1.

Turn the dial to the Water Time position. Press the 

Û

button.

2.

At this point the Station 1 indicator will be on and the

amount of time on that zone will be flashing. Press the

Ý

 or 

Þ

 button to adjust the time to the number of min-

utes Station 1 is desired to run. (

NOTE:

 Each zone can

be set to run from 0 - 99 minutes.)

3.

At this point the next zone indicator symbol will be on

and the amount of time for that zone will be flashing.
Press the 

Ý

 or 

Þ

 arrow to adjust the time to the correct

amount of time.

Start
Time

SU   MO   TU   WE   TH   FR   SA

A

B

C

Water Time

Auto

SU   MO   TU   WE   TH   FR   SA

A

B

C

AM