Instructions for Use and Maintenance 151-191 (1310)
trejonindustries.se
11
Breddningsvingen
monteras på
insidan av
maskinen
Moving parts.
Keep hands, feet, hair and clothing away from moving parts of the machine.
Let the machine work by it self, don’t try to help the machine with hands and fingers.
PTO-shaft.
When changing tractor always check the length of the PTO-shaft, a to long shaft
can damage both tractor and machine. It is forbidden to use PTO-shaft that does not fulfil
requirements from manufacture.
Make sure that PTO-shields are in good condition and fastened securely to the tractor. It is
forbidden to use a PTO-shaft with damaged or missing shield. Purchase a new shield if old
shield is damaged or missing.
Lifting and lowering machine.
Be careful when lifting or lowering the machine.
Stability.
The machine should not be mounted on a tractor with insufficient front shaft /back
shaft weight when the tractor becomes unstable and difficult to operate. When using a unit, a
minimum 20% of tractor and equipment weight must be on tractor front wheels. Without this
weight, tractor could tip over, causing personal injury or death. The weight may be attained
with a front end loader, front wheel weights, and ballast in tires or front tractor weights, read
the tractor’s instructions manual for more information.
In extremely uneven terrain rear wheel weights, front tractor weights, and/or tire ballast should
be used to improve stability.
Operating machine.
Be careful and reduce the speed when working on uneven surfaces.
Watch for holes, roots, rocks or other hidden objects. Do not drive near the edge of a gully,
ditch or stream bank.
When mowing over uneven terrain, observe the type of terrain and
develop a safe mowing pattern.
When driving in slopes:
Operate the machine up and down steep slopes, not across slopes, to prevent the tractor from
tipping. Avoid sudden stops and starts, slow down before changing directions on a slope. Pass
diagonally through sharp dips and avoid sharp drops to prevent hanging up the tractor and
machine. If tractor overturns, hold tight to steering wheel.
Operating in darkness.
When working in the dark hours, make sure there is sufficient lighting
in the working area.
Driver.
Do not operate the equipment when you are tired, sick or when using medication.
Only properly trained people with qualification is allowed to operate this machine.
Do not allow riders on the machine or tractor at any time. There is no safe place for riders.
Personal protective equipment.
Personal protection equipment including hard hat, safety
glasses, safety shoes, and gloves are recommended during assembly, installation,
adjustment, maintaining and/or repairing the implement. Avoid loose fitting clothing which can
become entangled. Wear sturdy, tough-soled work shoes and protective equipment for eyes,
hands, ears and head.
Safety cabin.
Operate the machine only with a tractor equipped with an approved Roll-Over-
Protective-System (ROPS). Keep doors at tractors cabin closed during operating, serious
injury or even death could result from falling off the tractor.
Daily maintenance.
Inspect the entire machine periodically. Look for loose fasteners, worn or
broken parts, and leaky or loose fittings. Periodically tighten all bolts, nuts and screws and
check that all cotter pins are properly installed to ensure unit is in a safe condition.
No wrappings or foreign objects are around the machine.
Frequently check mower blades. They should be sharp, free of nicks and cracks and securely
fastened.
