Instructions for Use and Maintenance 151-191 (1310)
trejonindustries.se
7
Breddningsvingen
monteras på
insidan av
maskinen
1 Introduction
1.1 Foreword
Thank you for choosing this OPTIMAL machine. We have concentrated our efforts in order to
develop a sturdy machine that will operate trouble-free for many years. The working life of the
machine, however, depends not only on us but also on you. We have compiled this instruction
manual in order to facilitate the use of the implement and describe proper maintenance
procedures. Read these instructions carefully. Contact the retailer from whom you purchased
the machine whenever you want to order repair parts or need any other assistance. When you
are ordering repair parts, make sure that you know the right model, type and serial number.
See the identification plate on the chassis.
1.2 Description
The equipment is designed to clear snow from level ground such as roads and parking lots.
The snow blower is to be mounted at the front or at the rear on the three point lift of the
tractor. Cat. 0/I. A double acting hydraulic connection is needed to turn the ejector tube. If the
equipment is fitted with an hydraulic flap regulator, an added double acting connection is
needed. The equipment is powered by the PTO of the tractor.
Check that the tractor PTO speed and rotation match the machine
.
1.3 Working stages
The equipment works in three stages:
1. Break-up and feeding in with self-cleaning feed screws with cutting action.
2. Transport to the ejecting rotor.
3. The ejecting rotor will powerfully throw out the snow through the ejector tube. The
ejector tube is adjustable as to the direction and the distance of the thrown snow.
