Version 1.0.1 - 2020-07-23
25
Translation of original instruction
B20 | B25 | B32
EN
B20-
B25-
B32_
GB.
fm
Img.3-8: Mounting drill chuck protection
Img.3-9: Mounting drill chuck protection
3.6
Installation
WARNING!
The condition of the underground and the fixing type of the machine foot to the
underground must be in a way that it can bear the loads of the drilling machine. The
foundation must be level. Check that the drilling machine foundation is horizontal with a
spirit level.
Check that the drilling machine foundation is horizontal with a spirit level.
Check that the foundation has sufficient load-bearing capacity and rigidity.
Place the drilling machine on the provided foundation.
Fix the drilling machine base to the substructure through the holes pre-drilled for this pur-
pose.
3.6.1
Fixing
In order to provide for the necessary stability of the drilling machine, connect the machine with
its foot to the substructure.
We recommend that you use shear connector cartridges or heavy-duty anchors.
Fix the foot of the drilling machine to the substructure with the holes pre-drilled for this pur-
pose.
The through-bore are marked with arrows on the machine base.
Setscrew
Through-bore
Arrow sign