Sicherheit
Version 1.2.3 - 2021-11-02
8
Originalbetriebsanleitung
S275N | S275NV
DE
S275
N
_S275
NV_DE_
1.f
m
1.3
Bestimmungsgemäße Verwendung
WARNUNG!
Bei nicht bestimmungsgemäßer Verwendung der Metallbandsäge
entstehen Gefahren für das Personal,
werden die Maschine und weitere Sachwerte des Betreibers gefährdet,
kann die Funktion der Maschine beeinträchtigt sein.
Die Maschine ist für den Einsatz in nicht explosionsgefährdeter Umgebung konstruiert und
gebaut.
Die Metallbandsäge ist für das Sägen von kaltem Metall, Guß- und Kunststoffen, oder anderen
nicht gesundheitsgefährlichen oder nicht stauberzeugenden Werkstoffen konstruiert und
gebaut.
Mit der Metallbandsäge darf kein Holz bearbeitet werden.
Die Form der Werkstücke muss so gestaltet sein, dass ein sicheres Einspannen im
Maschinenschraubstock gegeben und ein Herausspringen des Werkstücks während dem
Sägevorgang ausgeschlossen ist.
Die Metallbandsäge darf nur in trockenen und belüfteten Räumen aufgestellt und betrieben
werden.
Wird die Metallbandsäge anders als oben angeführt eingesetzt, ohne Genehmigung der Firma
Optimum Maschinen Germany GmbH verändert, wird die Metallbandsäge nicht mehr
bestimmungsgemäß eingesetzt.
Wir übernehmen keine Haftung für Schäden aufgrund einer nicht bestimmungsgemäßen
Verwendung.
Wir weisen ausdrücklich darauf hin, dass durch nicht von der Firma Optimum Maschinen
Germany GmbH genehmigte konstruktive, technische oder verfahrenstechnische Änderungen
auch die Garantie erlischt.
Teil der bestimmungsgemäßen Verwendung ist, dass Sie
die Grenzen der Metallbandsäge einhalten,
die Betriebsanleitung beachten,
die Inspektions- und Wartungsanweisungen einhalten.
Einschalten verboten!
Vor Inbetriebnahme
Betriebsanleitung lesen!
Netzstecker ziehen!
Schutzbrille tragen!
Schutzhandschuhe tragen!
Sicherheitsschuhe tragen!
Schutzanzug tragen!
Gehörschutz tragen!
Achten Sie auf den Schutz
der Umwelt!
Adresse des
Ansprechpartners