Safety
Version 1.2.3 - 2021-11-02
61
Translation of original instruction
S275N | S275NV
EN
S275
N
_S275
NV_G
B_1.
fm
Qualified electrician
With professional training, knowledge and experience as well as knowledge of respective
standards and regulations, qualified electricians are able to perform work on the electrical
system and recognise and avoid any possible dangers.
Qualified electricians have been specially trained for the working environment, in which they are
working and know the relevant standards and regulations.
Qualified personnel
Thanks to professional training, knowledge and experience as well as knowledge of relevant
regulations the qualified personnel is able to perform the assigned tasks and to independently
recognise and avoid any possible dangers themselves.
Instructed person
Instructed persons were instructed by the operating company regarding the assigned tasks and
any possible risks of improper behaviour.
1.6.2
Authorized personnel
WARNING!
Inappropriate operation and maintenance of the metal band saw constitutes a danger for
the personnel, objects and the environment.
Only authorized staff may operate the metal band saw!
Persons authorized to operate and maintain should be trained technical personnel and
instructed by the ones who are working for the operating company and for the manufacturer.
The operating company must
train the personnel,
instruct the personnel in regular intervals (at least once a year) on
- all safety standards that apply to the machine,
- the operation,
- generally accepted engineering standards.
check the personnel‘s knowledge level,
document the training/instruction,
require personnel to confirm participation in training/instructions by means of a signature,
check whether the personnel is working safety and risk-conscious and observes the
operating instructions.
The operator must
have obtained a training regarding the handling of the metal band saw,
know the function and mode of action,
before taking the machine in operation
- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
Additional requirements apply for work on the following machine components:
Electric components or operating materials: Must only be worked on by a qualified
electrician or person working under the instructions and supervision of a qualified
electrician.
Before starting work on electrical parts or operating agents, following measures are to be
performed in the following order:
- disconnect all poles
- secure against restarting
- check that there is no voltage
