Safety
Version 1.1.6 - 2021-9-17
10
Translation of original instruction
TU3008G
GB
T
U
3008G
_GB
_1.
fm
and strictly follow these operating instructions.
In the event of improper use
there may be a risk to the persons,
there is a risk of damage to the lathe and other property,
the correct function of the lathe may be affected.
Always disconnect the lathe, when cleaning or maintenance work is being carried out.
WARNING!
The lathe may only be used with the safety devices activated. Disconnect the lathe
immediately whenever you detect a failure in the safety devices or when they are not
mounted!
1.6
Qualification
1.6.1
Target group private users
The machine can be used in the private domain. The acumen of people in the private sector
with training in metal working was taken into consideration for creating this operation manual.
Vocational training or further instruction in a metal working profession is a prerequisite for safe
operation of the machine. It is essential that the private user is aware of the dangers involved in
operating this machine. We recommend visiting a training course in the operation of lathes.
Your specialist dealer can offer you an appropriate training course. These courses are also
offered by adult education centres in Germany.
1.6.2
Obligations of the User
The user must
have read and understood the operating manual,
be familiar with all safety devices and regulations,
be able to operate the lathe.
1.6.3
Additional requirements regarding the qualification
Additional requirements apply for work on electrical components or equipment:
They must only be performed by a qualified electrician or person working under the
instructions and supervision of a qualified electrician.
Before starting work on electrical parts or operating agents, the following actions must be taken
in the order given:
disconnect all poles,
secure against restarting,
check that there is no voltage.
1.7
User positions
The operator position is in front of the lathe.
