Easy Setup Instructions
1. Press or to select the type of TV
screen you have. The setup is complete.
2. Press
Power
to begin watching TV.
Notes
:
• If you pressed for the standard screen
(4:3) TV setting, the TV is set to receive
programming in 480i format on non-HD channels and 1080i format on
HD channels.
• If you pressed for the widescreen (16:9) TV setting, the TV is set to only
receive programming in 1080i format (even on non-HD channels).
Tip
: After you complete the setup, you can use to stretch or zoom
the picture.
Advanced Setup Instructions
1. Press or to select the type of TV screen you have.
2. Follow the on-screen instructions to select your picture formats.
3. Press
SEL
to toggle between the Save and Remove options, or
press to see how the next format looks on your TV screen.
Note:
If you see a black screen,
do not
press SEL . Press again
to view the next screen format.
4. After saving the picture formats, press
Exit
. The setup is complete.
5. Press
Power
to begin watching TV.
Tip
: After you complete the setup, you can
use to stretch or zoom the picture.
5
First make sure that your DVR for iO TV is properly connected to your HDTV
television and other electronic devices. Use the component (PrPbY) or HDMI
ports to connect the DVR for iO TV to your HDTV.
For more information on connecting your DVR to your TV, refer to page 18 —
Connecting Entertainment Devices.
Selecting HDTV Picture Formats with the HDTV Setup Wizard
The following section provides instructions for using the HDTV Setup Wizard
to select HDTV picture formats using the Easy and Advanced Setup modes.
Start the HDTV Setup Wizard
To start the HDTV Setup Wizard, follow these steps.
1. Make sure that the DVR for iO TV is powered
OFF
, but still plugged in to an
active power outlet, and connected to the HDTV using the proper connectors
(HDMI or Component cables).
2. Turn the TV
ON
.
3. With the DVR for iO TV powered
OFF
, press
Guide
and
Info
at the same time. Two
screens will appear: SD setup, choose
; and HD setup, choose . Select
the setup for your TV. The
HDTV Setup
Wizard
screen appears.
4. Press to start the setup.
5. Choose one of the following options:
• To choose the Easy Setup option,
press ; then, go to
Easy Setup
Instructions
on page 5.
Note
: Choosing the Easy Setup mode limits your HDTV
picture formats to 480i and 1080i,
depending on the TV type you select.
• To choose Advanced Setup option,
press ; then, go to
Advanced
Setup Instructions
on page 5.
Note
: Choosing Advanced Setup
mode allows you to save all the HDTV
picture formats, so that you can toggle
between them easily while watching TV.
4
PREPARING THE DVR FOR iO TV TO WORK WITH
YOUR HIGH-DEFINITION (HD) TV
Note:
This section is for customers with HDTV. If you do not have an HDTV,
skip to page 7.
A
A
B
B
Press
Guide
and
Info
at the same time
Setup Options
Press for Easy Setup: Used by most TV viewers
Press for Advanced Setup: Used by advanced TV viewers
Complete setup
A
B
Restart setup
Standard or Widescreen
Press if your TV has a standard screen (4:3)
Press if your TV has a widescreen (16:9)
Complete setup
A
B
A
B
B
B
Restart setup
Standard or Widescreen
Press if your TV has a standard screen (4:3)
Press if your TV has a widescreen (16:9)
Complete setup
A
CV2008-878 DVR V3.0:08-878 DVR V3.0 10/3/08 4:48 PM Page 4