OPTIMUM
M A S C H I N E N - G E R M A N Y
Technical data
Version 1.0 dated 2015-06-18
Page 16
Original operating instructions
S275N | S275NV
GB
2.2
Emissions
The generation of noise emitted by the metal belt saw is 73 dB(A) at idle.
If the metal belt saw is installed in an area where various machines are in operation, the noise
exposure (immission) on the operator of the metal belt saw at the working place may exceed 80
dB(A).
INFORMATION
This numerical value was measured on a new machine under the operating conditions specified
by the manufacturer. The noise behaviour of the machine might change depending on the age
and wear of the machine.
Furthermore, the noise emission depends on production engineering factors, e.g. speed, mate-
rial and clamping conditions.
INFORMATION
The specified numerical value represents the emission level and does not necessarily a safe
working level.
Though there is a dependency between the degree of the noise emission and the degree of the
noise disturbance it is not possible to use it reliably to determine if further precaution measures
are required or not.
The following factors influence the actual degree of the noise exposure of the operator:
Characteristics of the working area, e.g. size or damping behaviour,
other noise sources, e.g. the number of machines,
other processes taking place in proximity and the period of time, during which the operator
is exposed to the noise.
Furthermore, it is possible that the admissible exposure level might be different from country to
country due to national regulations.
This information about the noise emission should, however, allow the machine operator to eval-
uate the hazards and risks more easily.
CAUTION!
Depending on the overall noise exposure and the basic threshold values, machine
operators must wear appropriate hearing protection.
We generally recommend the use of noise protection and hearing protection.
Helical gear
Mobil 629
Spindle of the machine vice
Commercial lubricating grease
Slide bearing
Commercial lubricating grease
Coolant equipment
Commercial lubricating and cooling agent
Environmental conditions
S275N
S275NV
Temperature
5-35 °C
Humidity
25 - 80 %
Operating material
S275N
S275NV