OPTIMUM
M A S C H I N E N - G E R M A N Y
EC Declaration of Conformity
in accordance with the Machinery Directive 2006/42/EC Annex II 1.A
The manufacturer /
distributor:
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt
hereby declares that the following product
Product designation:
Metal belt saw
Type designation:
S275N
Serial number:
_ __ __ __ __
Year of manufacture:
20__
Metal belt saw for craft and industrial plants which meets all the relevant provisions of the above men-
tioned Directive 2006/42/EC as well as the other directives applied (below) including their amendments in
force at the time of declaration. The following other EU Directives have been applied: EMC Directive 2014/
30/EC, Low Voltage Directive 2014/35/EC
The safety objective meet the requirement of EC Directive 2006/42/EC.
The following harmonized standards were applied:
EN 13898:2003+A1:2009 Machine tools - Safety - Sawing machines for cold metal
EN 50581:2012 Technical documentation for the assessment of electrical and electronic products with
respect to the restriction of hazardous substances
EN 60204-1:2006/AC: 2010 Safety of machinery - Electrical equipment of machines - Part 1: General
requirements (IEC 60204-1:2005 (modified))
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduc-
tion (ISO 12100:2010)
Responsible for documentation: Kilian Stürmer, phone: +49 (0) 951 96555 - 800
Address:
Dr.-Robert-Pfleger-Str. 26, D - 96103 Hallstadt
Hallstadt, 2015-05-18
Kilian Stürmer
(CEO, General manager)