16
1. Place the motor base on a lat, dry and stable surface.
2. Underneath the juice bowl (4) is the pulp silicon (13).
Ensure that the silicon (13) is irmly inserted into the whole.
3. Place the juicing bowl (4) on top of the motor base (1).
Press down the separator (4) and rotate in a clockwise
direction, then lock it into position.
4. Place the basket (6) into the basket support (5) then place
all them in the separator (4).
5. Check that the “
●
” red symbol on the basket (6) needs to
align with the triangle mark on the separator (4).
Ensure that the basket (6) is completely pushed down.
Check that the yellow parts are correctly positioned.
6. Place the auger (7) into the basket (6).
Ensure that the auger (7) is in correct position then pressing
down on it.
You should hear the stop “click”.
7. Place the hopper (8) onto the separator (4).
Align the
“
●
” red symbol on the hopper (8) with the same
symbol on the separator (4).
Turn it clockwise to the locked position. The cover will
click into position.
8. Place the food pusher (9) into the hopper (8).
9. Place the pulp cup (3) so it its in position on the left hand
side of the slow juicer’s main body (1).
10. Place the juice cup (2) under the juicer spout (4a).
