8
• Lay out the power cable fully.
• Insert the power plug into an earthed wall socket that has
been correctly installed.
• Heat up the device four to five times at level 7(see
operation) without any bread , in order to burn off residue
from production. During this time ensure that there is suf-
ficient ventilation(e.g.: the window is open) as a small
amount of smoke can be emitted.
• Following this clean the device as described in cleaning
and maintenance.
Operation:
NORMAL TOASTING
• Place a maximum of 2 Sclices of toast into the two bread
slots. The toast slices must be placed next to each other
horizontally.
• Insert the power plug into a suitable socket(see before
first start-up).
• Use the browning control to select the desired toasting
setting from 1-7 (if you using the toaster for the first time,
select setting 3). To do so turn the dial either clockwise or
anti-clockwise. With setting 1 the lightest toasting
/browning is achieved, and with setting 7 the strongest.
The toasting /browning can vary depending on the type of
bread. We therefore recommend that you carry out a few
tests.
• Plese be aware: select a low toasting setting if you are
only toasting one slice of bread. If you toast without inter-
ruption, then the bread becomes darker at the same
browning setting due to the heat conduction of the
toaster. Let the toast cool down for a short time after
each toasting process.
• Push the on-level down until it automatically locks into
places(please note that the on-level does not lock into
place if the power plug is not connected with a power
socket). The toasting process begins.
• The toasting setting can also be altered during the toast-
ing process using the browning control.
• The device switches itself off automatically, as soon as
the pre-set browning setting has been reached. The on-
level jumps up .The slice of toast are ejected.
Caution!
Be
very careful when removing the slices of toast, as the
metal parts can be very hot.
• If you wish to end the toasting process prematurely,press
the cancel button. The on-lever jumps up and the toast
can be removed.
TOASTING FROZEN BREAD
• Turn the browning control to the desired setting and push
the on-lever down. Then press the defrost button.
The control lights of the defrost and cancel buttons come
on and the toasting process begins.
HEATING ALREADY TOASTED SLICES
• Turn the browning control to the desired setting and push
the on-lever down, then press thereheat button. The con-
trol lights of the reheat and cancel buttons come on and
the toasting process begins.
• When you remove slices of toast, it is best to not remove
them just by hand.
DANGER OF BURNS!
Use short slices of bread, which can
be removed without having to reach into the slot , as the on-
lever can be raised an extra 10mm top remove the toast.
• If slices of toast get stuck in the device for whatever
reason, then switch of the device immediately, pull the
plug out of the power socket and let the device cool down
completely. Try to remove the bread carefully without
damaging the toaster. Do not use any objects which con-
duct electricity to remove the bread.
Technical Parameters:
Power: 900 W
Voltage: 230 V~
Frequency: 50 Hz
Ecology – Environmental Protection
The “crossed-out trash bin” symbol on electrical
equipment or packaging indicates that the device
cannot be treated as general household waste
and should not be disposed of into containers for such
waste.
Obsolete or broken-down electrical device
should be
delivered to special designated collection points, organized
by local public administration, whose purpose is to collect
recyclable electrical equipment.
This way, each household helps reduce possible negative
effects influencing natural environment and allows the
reclaiming of materials which the product is made of.
Weight: 1.4kg
e
TS1506_IM_200.qxp 2010-08-17 13:22 Page 8 (Black plate)
