background image

 
                       (2CH/4CH SWITCHABLE UNIT) 
+----+--------------+---------------+------------+------------------------+ 
|Pin |              |               |            |                        | 
|No. |  WIRE COLOR  |  WIRE SPECS.  |   LABEL    |    REMARK              | 
+----+--------------+---------------+------------+------------------------+ 
| 1  |   WHT/BLK    |   AWG #20     |  FRONT L-  |   STRIP SOLDER         | 
|    |              |   2P CORD     |            |                        | 
+----+--------------+---------------+------------+------------------------+ 
| 2  |   GRY/BLK    |      "        |  FRONT R-  |        "               | 
+----+--------------+---------------+------------+------------------------+ 
| 3  |   GRN/BLK    |      "        |  REAR L-   |        "               | 
+----+--------------+---------------+------------+------------------------+ 
| 4  |   VIO/BLK    |      "        |  REAR R-   |        "               | 
+----+--------------+---------------+------------+------------------------+ 
| 5  |    BLACK     |   AWG 206     |   GROUND   |  6.3mm r FORK TERMINAL | 
+----+--------------+---------------+------------+------------------------+ 
| 6  |   ORG/WHT  * |      "        |   DIMMER   |   STRIP SOLDER         | 
+----+--------------+---------------+------------+------------------------+ 
| 7  |  PINK/WHT  * |      "        | PHONE MUTE |        "               | 
+----+--------------+---------------+------------+------------------------+ 
| 8  |   WHITE      |   AWG #20     |  FRONT L+  |                        | 
|    |              |   2p CORD     |            |        "               | 
+----+--------------+---------------+------------+------------------------+ 
| 9  |    GRAY      |      "        |  FRONT R+  |        "               | 
+----+--------------+---------------+------------+------------------------+ 
| 10 |    GREEN     |      "        |  REAR L+   |                        | 
+----+--------------+---------------+------------+------------------------+ 
| 11 |    VIOLET    |      "        |  REAR R+   |         "              | 
+----+--------------+---------------+------------+------------------------+ 
| 12 |     RED      |   AWG #20     | +12 V TO   | 250/ 1A FUSE & 24M/M   | 
|    |              |               | IGNITION   |  TRANS STRIP SOLDER    | 
+----+--------------+---------------+------------+------------------------+ 
| 13 |   YELLOW     |      "        | +12 V TO   | 250/ 1A FUSE STRIP     | 
|    |              |               |  BATTERY   |     SOLDER             | 
+----+--------------+---------------+------------+------------------------+ 
| 14 |  DARK BLUE/  |       "       | AMP REMOTE |   WIRE BANDING &       | 
|    |    WHITE     |               |  TURN ON   |    TUBE HEATING        | 
|    |              |               | 500mA MAX  |                        | 
|    |              |               |+12 V OUTPUT|                        | 
+----+--------------+---------------+------------+------------------------+ 
 
* May or may not be present depending on features of individual radios. 
 
                                4 Chnl Unit 
+----+--------------+---------------+------------+------------------------+ 

Summary of Contents for 120-1971

















Reviews: