30
If you have not yet entered any programs,
the TV displays the program entry menu
when you press
PROG
.
8. Use
SEL
s/t to select the date when you
want to record.
To record a program at the same time on
the same day every week, press either but-
ton until the TV displays
WEEKLY
and the
desired day of the week.
To record a program at the same time
Monday through Friday, press either button
until the TV displays
DAILY
MON-FRI
.
To record a program at a set time today,
press either button until the TV displays
TODAY
and today’s date.
To record a program at a specific time and
date, press
SEL
s/t to select the specific
date.
Press
SET
to enter your selection.
9. Use
SEL
s/t to select the start hour. When
the correct hour appears, press
SET
. Then
use
SEL
s/t to select the minute, and press
SET
.
10. Repeat Step 9 to set the end time.
11. Use
SEL
s/t to select the channel.
To record from a source connected to the
AUDIO 1/VIDEO 1 IN
(or
AV2
for the Model
60) jacks, press
SEL
s/t until the TV dis-
plays
L
(
L
1
or
L2
on the Model 60).
12. Use
SEL
s/t to select the tape speed (
SP
,
LP
, or
EP
).
13. Double-check all the set information.
• If the information is correct, press
PROG
.
• If an entry is not correct, press
SET
or
CLEAR
to move the cursor to the wrong
entry, enter the correct information, then
press
PROG
.
Note: The TV displays
PROGRAM
IS
INCOMPLETE
if you did not correctly
enter a timer program before pressing
PROG
. Check and correct the program,
then press
PROG
again.
The TV displays the timer program set-
tings. To enter more programs, use
SEL
s/t
to select another program number and
repeat Steps 7–13.
14. Press
PROG
again. The TV briefly displays
TURN
VCR
OFF
FOR
TIMER
RECORD-
ING
.
15. Press
POWER
to turn off the VCR. The
VCR displays TIMER.
Notes:
• Be sure that the VCR displays TIMER
when you turn it off. If it does not appear,
check your programming.
• If you insert a cassette with its erase-
protection tab removed and set the VCR’s
timer, the VCR ejects the cassette and
flashes TIMER on the display.
• If you set up the VCR to record a cable
program through a cable box, be sure to
leave the cable box turned on and tuned to
the desired station before the timer pro-
gram starts.
• You can manually turn on and operate the
VCR before the set times, but the VCR
starts an automatic timer recording only if
the power is off at the set start time.
SELE CT START DATE
WEEKLY --:-- --:-- --
SUN
DATE
START
STOP
CH
SLP
: PUSH SET
TO END PUSH PROG KEY
BY SELECT / KEY
SELE CT START DATE
DAILY --:-- --:-- --
MON-FRI
DATE
START
STOP
CH
SLP
: PUSH SET
TO END PUSH PROG KEY
BY SELECT / KEY
16-547.fm Page 30 Tuesday, July 20, 1999 4:45 PM
