16
Adding/Erasing Channels
We recommend you check the channels the
VCR automatically stored. It might have stored
a distant, weak channel that you normally
would not watch, or it might have missed a
channel you want to store.
If the tuner stores a channel that you do not
want, tune to that channel and press
ADD/DLT
.
CHANNEL
nn
DELETED
appears on the TV,
and the unwanted channel is erased from the
tuner’s memory.
If you want to program a weak channel that au-
tomatic programming missed, enter the desired
channel number using the remote control’s
number buttons. Then press
ADD/DLT
.
CHAN-
NEL
nn
ADDED
appears on the TV, and the
channel is added to the memory.
Reprogramming Tuner Memory
You might want to reprogram the VCR’s tuner
memory if you move or change from an anten-
na connection to a cable TV connection.
Follow these steps to reprogram the tuner.
1. Press
MENU
to display the main menu.
2. Use
SEL
s/t to highlight
SET
UP
CHAN-
NEL
, then press
SET
.
3. Press
SET
to select the broadcast system,
either
TV
or
CATV
.
4. Press
SEL
t to highlight
AUTO
SET
, then
press
SET
. Then press
CH
s to start auto
channel memory programming.
Notes:
• To exit the programming mode, press
MENU
at any time.
• The VCR tries to automatically set the
clock after programming all the active
channels.
Turning On Auto Clock Set
If you manually set the VCR’s clock, then find
that EDS is available in your area, you can turn
on the auto clock set feature. This ensures that
the VCR sets itself to the correct time after a
power failure of less than 24 hours.
1. Press
MENU
to display the main menu.
2. Use
SEL
s/t to highlight
SET
CLOCK
, then
press
SET
.
3. Use
SEL
s/t to highlight
AUTO
SET
, then
press
SET
.
4. Follow the on-screen instructions.
CHANNEL 08 DELE TED
or
ADDED
SET UP CHANNEL
ANTENNA SYSTEM
: CATV
AUTO SET
SELECT : PUSH SELECT /
SET : PUSH SET KEY
END : PUSH MENU KEY
– – – – – SET CLOCK – – – – –
SELECT
SET
END
: PUSH SELECT /
: PUSH SET KEY
: PUSH MENU KEY
AUTO SET
MANUAL SET
16-548.fm Page 16 Tuesday, July 20, 1999 4:54 PM
