A-5230M2 / A-5260M2 Version 1.1
Page 7 of 9
A-5230M2 / A-5260M2
Amplifier
7. CD/MP3 PLAYER OPERATION
Select CD mode with
LINE
select switch.
1. Select CD mode with LINE select switch.
2. 2. Press POWER key on CD player.
3. Load disc (label side up) into player and PLAY starts automatically.
4. Press PAUSE key and symbol
ll
appears in the display and play is suspended. Press pause
key to resume play.
5. Pressing key selects the next track and
key the previous track.
6. Press the RANDOM key, random appears in the display and tracks are played out of
sequence.
7. Press the REPEAT key once and symbol
appears on the display and the current track Is
repeated. When the key is pressed twice the symbol
appears and indicates repeat play
of the disc. TO cancel these functions press the REPEAT key.
8. Programming the CD player – in STOP mode.
a. Press the PROGRAM key.
b. Use the next
or previous
key to select a track.
c. Press REPEAT key to memorise the selected track in your program. Repeat stages (ii)
and (iii) to program a maximum of 20 tracks.
d. Press the PLAY key to start the program (Note: The program repeats itself until the CD
player is stopped).
8. TUNER OPERATION
For FM reception connect a dipole aerial using 75
Ω
coaxial to the socket at the rear of the unit.
Connect the supplied antenna to the AM spring loaded terminals.
1. Select TUNER mode with the Line select switch.
2. Select AM or FM with the BAND key.
3. Use the UP/DOWN keys to set a frequency manually or the SCAN key to automatically search
for the desired station.
4. To program a station press the ME (Memory) key.
5. Press a MEMORY key (M1 to M5) or SHIFT key and memory key (M6 to M10) to store a
frequency.
