10
USING THE CD PLAYER
USING THE REMOTE
CONTROL
Several buttons on both the system
and the remote control operate the
same CD player functions.
To use the remote control, be sure
that its front end is pointing with a
clear path towards the front of the CD-
3329, then press the desired buttons.
LOADING A CD
1. Set the switch to
CD
.
2. Press
OPEN
beside the CD 1 or
CD 2 compartment door to open
either compartment.
3. Place a CD in the tray with the
label facing up.
Note: Be sure the CD is securely
in place.
4. Close the compartment door.
CD
,
the current tray number and the
total number of tracks appear after
a few seconds.
Note: If no CD is installed,
00
appears again after a few sec-
onds.
To unload the CD after it finishes play-
ing, press
OPEN
and remove the CD.
14-507.fm Page 10 Wednesday, June 30, 1999 12:01 PM