11
• When you finish using the AC
adapter, disconnect it from the
AC outlet first, then unplug it
from the CD player.
Follow these steps to use an AC
adapter.
1. Attach the 4.0 mm outer diame-
ter/1.7 mm inner diameter barrel
plug to the adapter cord, match-
ing the positive (+) on the plug
with TIP on the cord.
2. Set the adapter’s voltage switch
to 6V.
3. Insert the adapter’s barrel plug
into the CD player’s
EXT DC 6V
jack.
Note: Battery power discon-
nects when you connect an AC
adapter to the CD player
(unless you are using a special-
EXT DC 6V
order nickel-cadmium battery
pack).
4. Plug the other end of the
adapter into a standard AC out-
let.
USING VEHICLE
BATTERY POWER
You can power your CD player from
your vehicle’s battery using an op-
tional DC adapter, such as Cat. No.
273-1801.
Cautions:
• You must use a DC adapter that
supplies 6 volts and delivers at
least 550 milliamps. Its center
tip must be set to positive, and
its plug must correctly fit the CD
player’s
EXT DC 6V
jack. The
recommended adapter meets
these specifications. Using an
adapter that does not meet
these specifications can dam-
age the CD player or the
adapter.
42-5067.fm Page 11 Thursday, August 12, 1999 10:10 AM