10
OPERATION
BASIC OPERATION
1. To turn on the Concertmate 970,
set
POWER/MODE
to
NORMAL
.
The POWER/MODE indicator
lights.
Note: To save power, the key-
board automatically turns off after
about 6 minutes if you do not
press a key. To turn the keyboard
on again, set
POWER/MODE
to
OFF
then back to
NORMAL
. (To
cancel the auto power off feature,
see “Changing Auto Power Off” on
Page 20.
2. Begin playing the keyboard.
Notes:
• The Concertmate 970 automati-
cally selects the sound PIANO
(No. 00) when you turn the
power on. To select a different
sound, see “Using the Preset
Sounds” on Page 12.
• To select an auto-rhythm, see
“Using the Preset Auto-
Rhythms” on Page 15.
• To play auto accompaniment,
see “Using Auto Accompani-
ment” on Page 17.
POWER/MODE
FINGERED
CONCERT CHORD
NORMAL
ON
OFF
VOLUME SYNCHRO/
FILL-IN
START/
STOP
TEMPO
TRANSPOSE/TU
• The scores of the Juke Box
songs appear in this Owner’s
Manual (see “Songbook” on
Page 29).
3. Press
VOLUME
s to increase the
sound level or
VOLUME
t to
decrease it. The current setting
appears on the display.
Notes:
• The volume setting range is
between 0 (no sound) and 9
(maximum). Each time you turn
on the keyboard, the volume
setting is set to 7.
• To quickly change the volume
setting, press and hold
VOL-
UME
s or t.
• You can also adjust the volume
by pressing either
VOLUME
but-
ton once so the current setting
appears on the display, then
entering the desired volume
setting using the number keys
(0-9).
• To return to the default setting
of 7, press both
VOLUME
but-
tons at the same time.
• The volume level differs
depending on the sound,
accompaniment, or song you
selected.
4. To turn off the Concertmate 970,
set
POWER/MODE
to
OFF
. The
POWER/MODE indicator turns
off.
42-4032.fm Page 10 Wednesday, August 11, 1999 4:45 PM