3
2. Separate the wire conductors for a
length of about 2 inches, then
remove about
1
/
2
inch of insulation
from the wire’s ends using a wire
stripper.
3. Press the speaker’s black nega-
tive (–) terminal tab and insert one
of the bare wire ends into the
opening. Then release the tab.
4. Press the speaker’s red positive
(+) terminal tab and insert the
other bare wire end into the open-
ing. Then release the tab.
5. Using the speaker wire’s coding as
a guide, connect the other end of
the speaker wire to the amplifier’s
corresponding (right or left)
speaker terminals.
MAINTENANCE
To enjoy your Optimus PRO-LS1 Mini
Home Theater Satellite Speaker for a
long time:
• Keep the speaker dry. If it gets
wet, wipe it dry immediately.
• Use and store the speaker only in
normal temperature environments.
• Handle the speaker gently and
carefully. Don’t drop it.
• Keep the speaker away from dust
and dirt.
• Clean the speaker’s cabinet with a
soft, dry cloth.
Caution: You might permanently
damage your speaker by cleaning
it with a vacuum cleaner. Instead,
use a feather duster or a soft cloth.
Modifying or tampering with the speak-
er’s internal components can cause a
malfunction and invalidate its warranty.
If your speaker is not performing as it
should, take it to your local RadioShack
store for assistance.
40-4082.fm Page 3 Wednesday, August 11, 1999 11:05 AM
