UMX-TEL version 4.3.000AS
12
UMX-TEL
(ASIA VERSION)
DTMF Telephone interface card
for UMX-03/0 audio matrix
5.
INSERTING THE CARD
The card occupies one slot on the
matrix.
To insert the card proceed as
follows:
1)
Disconnect the power supply
to the unit (POWER SUPPLY 1
and POWER SUPPLY 2 strips).
2)
Remove the rear blank plate
for the slot where the card is
to be inserted.
3)
Insert the card by fitting it
into the slot guides and
fasten it by means of the
fastening screws.
4)
Reconnect the power.
Figure 5
ATTENTION
: If the UMX-03/0 audio matrix
has any card configured with micro sensitivity,
2 slots must be left between these cards and
the UMX-TEL card.