background image

 

 

UMX-TEL version 4.3.000AS 

UMX-TEL 

(ASIA VERSION) 

DTMF Telephone interface card 

for UMX-03/0 audio matrix 

 

PARAMETER 6: NUMBER OF DIGITS FOR CALLING ZONES OR GROUPS 

This defines the number of digits that must be entered to call a zone or group (maximum 3 digits / 999 zones-groups), or establish 

that the call will be to previously defined fix zones. 

P 6 

NUMBER OF DIGITS FOR CALLING ZONES OR GROUPS 

0 Digits. No need to select zones when paging. The messages destination is always the same (zones or groups 

previously defined when configuring the card).  

1 Digit. Allows to call 9 different zones or groups (from 1 to 9). 

2 Digits. Allows to call 99 different zones or groups (from 01 to 99). 

3 Digits. Allows to call 999 different zones or groups (from 001 to 999). 

4 Digits. Allows to call 9999 different zones or groups (from 0001 to 9999). 

 
 
 

 

PARAMETER 7: DETECTION TIME OF DTMF “1” HANGING UP TONE 

Admits values from 0 to 9. Increases the detection time of the DTMF hanging up tone by steps of 30 ms. (hanging up functionality 

by pressing 1). 0 = disabled, 1 = 90 ms … 9 = 330 ms). 

P 7 

DETECTION TIME OF DTMF “1” HANGING UP TONE 

Hang up by pressing 1 deactivated 

90 milliseconds 

120 milliseconds 

150 milliseconds 

180 milliseconds 

210 milliseconds 

240 milliseconds 

270 milliseconds 

300 milliseconds 

330 milliseconds 

 
 
 

 

PARAMETER 8: HANGING UP TONE DETECTION TIME 

According to the telephone central type or telephone line quality the card may interpret some voice tone as hanging up tone. If this 

occurs, increase this parameter by fixing a longer detection time. 
Admits values from 0 to 9 (see the 

P8

 table). 

IMPORTANT

: if 0 is assigned to this parameter, the automatic hanging up function is deactivated; in this case, if telephone is 

hanged up and communication time is not finished (parameter 10), the hanging up tone will be reproduced in the public 

address system until this time finishes. 
To avoid this, 

the system includes the hanging up forcing functionality, by pressing “1”.

 By pressing the “1” key, the telephone 

is hanged up, independently from the assigned values to parameter 8 (hanging up tone detection time) and to parameter 10 

(communication time). 

Summary of Contents for UMX-TEL

















Reviews: