background image

 
 

  

 

UP-1000U3 Version 1.0

 

 

 

Page 9 of 9

 

 UP-1000U3

 

Amplifier 

7. GUARANTEE CERTIFICATE

 
1. OPTIMUS S.A. guarantees that its products are free from material and 
manufacturing defects when they are first delivered to the purchaser. 
 
 
2. In accordance with the conditions outlined here, OPTIMUS S.A. guarantees 
its products for two (2) years from the date on which the purchaser acquires 
the product. If, within this guarantee period, defects appear which are not due 
to factors outlined in section 2, OPTIMUS S.A. shall replace or repair the unit 
using equivalent, new or reconstructed replacement parts, as it deems fit. If 
replacement parts are applied which improve the unit, OPTIMUS S.A. reserves 
the right to charge the client for the additional cost of these components. 
 
3. No guarantee benefits shall be provided other than those cited here. 
 
4. In order to claim the guarantee rights, it shall be an essential requirement to 
present the original purchase invoice or the guarantee certificate. 
 
 
2. GUARANTEE PROVISIONS 
 
1. In the event that the product had to be modified or adapted to comply with 
local requirements concerning technical specifications or safety, and if the 
country in question is not the country for which the product was originally 
designed and manufactured, defects are not considered to be material or 
manufacturing defects. Furthermore, the guarantee does not cover the 
execution of these modifications or adaptations, regardless of whether or not 
they have been carried out correctly. 
Nor shall OPTIMUS S.A. be responsible for any costs under this guarantee for 
these types of modifications. 
 
2. The guarantee shall not entitle the purchaser to inspection or free 
maintenance or repair of the unit, particularly if the defects are due to 
inappropriate use. Nor do the guarantee rights cover defects in wearing parts 
that become worn as a result of normal wear and tear. Wearing parts are, in 
particular, potentiometers, switches/keys, and similar parts. 
 
3. The guarantee does not cover defects in the equipment unit caused by: 
Abuse or incorrect use of the unit for purposes other than those for which it is 
intended, in non-compliance with the service and maintenance instructions 
specified in the Manual and/or Technical Instructions for the unit. 
Connection or use of the product in a manner that does not correspond to the 
technical or safety requirements of the country in which the unit is used. 
Installation in conditions other than those indicated in the Manual and/or 
 Technical 

Instructions. 

Deficiency or interruptions in the electricity supply or installation defects which 
imply use in abnormal conditions. 
Damage caused by other equipment units that are connected to the product. 
The use or installation of Software (programmes), interfaces, parts or supplies 
not provided and/or not authorised by OPTIMUS S.A. 
Failure to use the original packaging for transportation. 
Damage caused by force majeure or other causes not attributable to 
OPTIMUS S.A. 
 
4. The following elements are not covered by this guarantee: 
All plastic surfaces and all parts exposed to outdoor conditions which have 
been scratched or damaged as a result of normal or abnormal use. 
Breakages, knocks, damage due to a fall or scratches caused by moving the 
unit in any way. 
Damage caused by tests, use, maintenance, installation or inappropriate 
adjustments, or as a result of any alteration or modification of any kind not 
carried out by a Service Authorised by OPTIMUS S.A. in compliance with this 
guarantee. 
Damage to persons or property that might be caused by the improper use of 
the equipment, including lack of maintenance. 
 
5. The guarantee shall not be valid whenever the following is observed: 
Amendments or corrections made to the details of the guarantee certificate or 
purchase invoice. 
Failure to produce the original invoice or the absence of a date on this. 
Absence of the serial or batch number on the equipment. 
 
6. In the case of personal computers, the guarantee will not cover the 
elimination of computer viruses, the restoration of programmes damaged by 
these or the reinstallation of the disk following its deletion. 
 

7. The rights of this guarantee are invalidated if the product has been repaired 
or opened by staff unauthorised by OPTIMUS S.A. or by the client himself. 
 
8. If OPTIMUS S.A. were to establish before the purchaser that the damage 
affecting the unit does not entitle a claim to be made under the guarantee, the 
costs of checking the equipment incurred by OPTIMUS S.A. shall be borne by 
the client. 
 
9. Products not covered by the guarantee shall only be repaired once payment 
has been effected by the client. In the event that the guarantee rights do not 
apply, OPTIMUS S.A. shall duly inform the client. If, within a period of 6 weeks 
from this communication, no written repair order is received from the client 
confirming acceptance of the costs, OPTIMUS S.A. shall return the unit in 
question to the client. In this case, the transport and packaging costs shall be 
invoiced separately and payment shall be made on delivery. In the event that a 
repair order is sent by the client, confirming that he assumes the costs of 
repair, the transport and packaging costs shall be invoiced additionally, and 
also separately. 
 
10. If the equipment needs to be transferred to the Authorised Service Centre, 
transportation shall be effected by the responsible party according to the 
guarantee, who will also bear the freight and insurance costs. 
 
11. In the event of a defect, OPTIMUS S.A. guarantees that the repair and/or 
replacement of parts so that the unit operates correctly will be made within a 
period of no more than 30 days. Nevertheless, OPTIMUS S.A. would like to 
clarify that the normal period does not exceed 30 days. 
 
12. All parts or products replaced as part of the guarantee services shall 
become the property of OPTIMUS S.A. 
 
 
3. TRANSFER OF GUARANTEE  
 
The guarantee is solely awarded to the original purchaser (principal client) and 
is not transferable. With the exception of OPTIMUS S.A., no third party 
(dealers, etc.) is authorised to award additional guarantees on behalf of 
OPTIMUS S.A. 
 
4. CLAIMS FOR DAMAGE 
 
In the event that OPTIMUS S.A. cannot provide a suitable guarantee service, 
the purchaser shall not be entitled to claim any indemnity for damages arising. 
The responsibility held by OPTIMUS S.A. is limited in all cases to the invoicing 
price of the product. 
 
 
5. RELATION WITH OTHER GUARANTEE RIGHTS AND NATIONAL LAW 
 
1. This guarantee does not affect the rights of the purchaser with respect to 
the vendor arising from the contract of sale accomplished. 
 
2. These conditions of the guarantee provided by OPTIMUS S.A. are valid as 
long as they do not contradict the corresponding national law on guarantee 
provisions. 
 
3. OPTIMUS S.A. guarantees that this product complies with the safety 
regulations in force in the country. 
 
 
 
THIS LIMITED GUARANTEE DECLARATION IS THE EXCLUSIVE 
GUARANTEE OFFERED BY OPTIMUS S.A. ALL OTHER EXPLICIT OR 
IMPLICIT GUARANTEES ARE EXCLUDED, AND THIS ALSO APPLIES TO 
GUARANTEES OF MARKETABILITY AND SUITABILITY FOR A 
PARTICULAR PURPOSE. (EXCEPT WHEN THESE GUARANTEES ARE 
REQUIRED BY AN APPLICABLE LAW). NO GUARANTEE, EITHER 
EXPLICIT OR IMPLICIT, SHALL BE APPLIED ONCE THE GUARANTEE 
PERIOD HAS EXPIRED. 
 
 
OPTIMUS S.A. After-Sales Service C/ Barcelona 101 
17003 - GIRONA 
Tel.: 902 151 96 / 972 203 300 
Fax: 972 21 84 13 
e-mail : girona@optimus.es  

1999/44/CE 

 

 -mail : girona@optimus.es 1999/44/CE 

Summary of Contents for UP-1000U3




















Reviews: