Move cursor to“start scan”,and press iris on to start related scan.
D1.Left Boundary Setup
Move cursor to “Set left boundary”,and press iris on to setup mode, it
shows ”press iris on to confirm…”. User can make operate dome to expected
position, and press iris on to save current position as left boundary.
E1. Right boundary setup
Move the cursor to “set right boundary”, and press iris on to enter setup
mode,it shows ”press iris on to confirm…”. User can make operate dome to
expected position, and press iris on to save current position as right boundary.
F1.
Scan speed
Move cursor to “scan speed”,and press iris on to enter setup mode. Move the
joystick
upward and downward to set the speed level as 1-30.
C
:
Sequence
A1.SEQ NO.
Move the cursor to SEQ NO. and press the key IRIS ON(key on control keyboard)
to enter the edition mode of sequence No., move the joystick upward and
downward to select number. Then press IRIS ON to confirm.
B1. TITLE
Move the cursor to TITLE and press IRIS ON to enter the edition mode of
sequence title.
34