V 1.0 - eng
2
CMHO series
| INSTRUCTIONS MANUAL
1. MCSM Macro setup
Setting-up the Scheimpflug mount is easy.
First screw the lens into the camera C-mount, just like with any common lens.
Loosen the lens C-mount adaptor by unscrewing the set-screws. Tune the lens phase to the right
position, then tighten the set-screws.
Mount the lens to a secure fixture by means of the threaded holes. Once the lens is mounted,
adjust the focus until the image at the centre of the detector is sharp; you don’t need to tilt the
detector yet.