FESTIVAL BOX
13 / 20
rev. 1.0
Device Details
SFP Ports
FESTIVAL BOX is equipped with six (Petit) or twelve (Grand) SFP ports that can be populated with different SFP
modules that run up to 2Gbit of data.
Data from external SFP port is converted to the internal CWDM SFP fiber transceivers..
The internal SFP transceivers connect to the internal CWDM passive multiplexing module, which allows multiple
protocols to be combined into a single fiber.
All internal SFP fibre transceivers are populated at the time of manufacturing. Internal SFP should not be
accessed or changed by user.
Aux Ports
External AUX ports connect directly to the multiplexer module. Those ports can be used to an external device
such as an Ethernet switch populated with 1310nm fiber transceivers.
Main Ports
FESTIVAL BOX is populated with passive CWDM multiplexing module(s) which combines all ports to the MAIN
connection. MAIN ports are dedicated to be used with multimode cabling.
Power Supply
The device is equipped with two power supplies and inputs. If the primary power supply were to fail, due to
disruption of the power source or in the case of a power supply malfunction, the device will automatically switch
over to the redundant power supply. In order to make the power supply to the device redundant, both power
inputs must be connected to the mains supply, if possible to different phases, circuits, or by having one of the
power supplies connected to an uninterrupted power supply (UPS).
The power supplies operate with mains voltage of 100 ... 240 V and frequency of 50
…
60 Hz. The device can be
used throughout the world without any modifications or transformers.
Control
The FESTIVAL BOX is a plug-and-play device that does not require any user control or configuration.
Please note:
The switched-mode power supplies operate at very high voltages.
Coming into contact with the power supplies can lead to considerable electric shock,
which may result in death.
To prevent electric shock, do not remove any covers of the device.
