background image

 

 

FESTIVAL BOX

 

5 / 20 

rev. 1.0

 

 

Cleaning 

Only  use  a  dry  linen  cloth  to  clean  the  device.  If  the  unit  is  very  dirty,  moisten  a  cloth  using  a  little 
water and a small amount of household detergent. Never use cleansing agents containing solvents to 
clean the device. 

 

Operating and Storage Temperature 

Operating temperature:  -20

°

50

°

 -4

°

 122

°

F; ensure proper ventilation 

Storage temperature:  -20

°

60

°

 -4

°

 140

°

 

 Power Supply 

The  device  can  be  disconnected  from  the  power  supply  by  unplugging  the  power  cord.  The  power 
cords  must  be  freely  accessible  at  all  times.  The  device  should  be  disconnected  during  lightning 
storms or when the device is unused for a long period of time.  

 

Never disconnect the main plug by pulling the cable, always pull the plug itself. 

Power-supply cords should be routed in such a way that they are not likely to be walked on, crushed, 
pinched,  or  damaged  in  any  other  way.  Pay  special  attention  to  the  plugs  and  the  sockets  of  the 
device. 

 

 

Fuse 

There  is  no  fuse  in  the  device.  The  power  supplies  contain  circuitry  that  protects  the  device  from 
overload.  

 

Lightning 

For  additional  protection  of  this  device  during  lightning  storms,  or  when  it  is  left  unattended  and 
unused for a long period of time, disconnect the power cord. This will prevent damage to the device 
due to lightning and power line surges. Disconnection from the mains power supply is only possible 
by disconnecting the power plug from the mains socket. 

 

Eye Safety 

This  product  is  a  Laser  Class  1  product.  It  complies  with  IEC  60825-1,  FDA  21  CFR  1040.10,  and 
1040.11. 

 

External objects and/or liquids 

Never push objects of any kind into the device through openings in the casing. They may come into 
contact with dangerous voltage points or short out parts that could result in a fire or electric shock. 
Never spill liquid of any kind on the device. 

Important:

 

The switched-mode power supplies operate at very high voltages.  

Coming into contact with the power supplies can lead to considerable electric shock, 
which may result in death. 

Important:

 

A damaged power cable must be replaced immediately. 

The device must be grounded. Disconnecting the ground is strictly prohibited. Ensure 
that 

the 

device 

is 

always 

grounded 

using 

the 

power 

connector.  

Do not cover the ground connection of the power connector with any kind of insulation 
material! 

Summary of Contents for FESTIVAL BOX GRAND





















Reviews: