103
English
Appendices
►
If possible, turn off the projector, then unplug the power cord and
wait at least 60 seconds before reconnecting power.
If the remote control does not work
►
Ensure that the operating angle of the remote control is within
±15° horizontally and vertically to one of the IR receivers on the
projector.
►
Remove any obstructions between the remote control and the
projector. Move to within 7 m (±0°) of the projector.
►
Make sure the batteries are inserted correctly.
►
Replace batteries if they are exhausted.
LED lighting message
Message
POWER/STAND
-
BY LED
Temp-LED
Light-LED
(Blue/Red)
(Yellow Green)
(Amber)
Standby State
(Input power cord)
Red
Power on (Warming)
Flashing
Blue
Light lighting
Blue
Power off (Cooling)
Flashing
Blue
Error (Over Temp.)
Flashing
Red
Error (Fan fail)
Flashing
Red
Flashing
Error (Light fail)
Flashing
Red
*
POWER/STANDBY LED turns ON when OSD appears, and turns OFF
when OSD disappears.
Steady light
No light