23
English
Using the Projector
Projecting Image
When the projector is turned on, it automatically searches for
connected devices.
Once a device is detected, the projector projects the image or
the menu of the input source, such as in:
►
Network Display
: When a local area network or
wireless network is detected (see "Connect to Network"
on page 16).
►
USB Display
: When a computer is connected through
the mini USB port of the projector (see "USB Display
mode" on page 62).
►
Memory Drive Display
: When a flash drive or SD
card is detected (see "Memory Drive Display" on page
47).
Switch Input Source
If the desired input source is not included in the auto search
function (see Input Source menu) or more than one input
source devices are connected, you can switch the input source
manually by doing one of the following:
►
Press the direct input source key on the remote control.
►
Press
on the control panel repeatedly to scroll
through the options.
►
Press the
Source
key on the remote control repeatedly
to scroll through the options.
Refresh Input Source
While the projector is operating and a new input source device
is connected, press
on the control panel or the
Re-Sync
key on the remote control to refresh and synchronize the
projector with the input sources.
Only input
sources selected
in the Input
Source menu
(see *) will be
auto searched
by the projector.
The number of
input sources
to auto search
may affect the
length of time
for the projector
to finish the
search.
