42
English
Adjusting the Settings
SETUP | Network
Network State
Display the network connection status. When connected,
you can access and control the projector through a web
browser.
DHCP
Use this function to set the projector network connection.
►
On: Automatically assign an IP address to the projector
from a DHCP server.
►
Off: Assign an IP address manually.
IP Address
If DHCP is “Off”, use this function to enter an IP address.
Press or
to move between fields and press
or to
adjust the value.
Subnet Mask
If DHCP is “Off”, enter the subnet mask number. Press or
to move between fields and press
or to adjust the
value.
Gateway
If DHCP is “Off”, enter the default gateway of the network
connection. Press or
to move between fields and press
or to adjust the value.
When IP settings
are changed,
multimedia
modules (including
USB Display,
Network Display
and Flash Drive
functions) will
restart, and the
process will take
60~90 seconds.
