50
*
DVD Projector
MAINTENANCE
E
NGLISH
Message Reminders
■
“Lamp is approaching the end of its useful life in full power opera-
tion. Replacement Suggested!” will be shown about 10 seconds,
when lamp is nearing end of life.
■
“Projector Overheated. Lamp will automatically turn off soon.”
will be shown when the system temperature is too high.
■
“Fan Fail” will be shown momentarily before shutdown is fan is
out of order.
DVD Player Problems
If a message show an error message:
■
Make sure the disc is inserted with the label facing up.
■
Make sure the disc is completeness, not scratch, dirtiness or warp.
■
The type of disc you inserted might not be supported by the in-
ternal DVD player. If so, you can not play this type of disc. Try a
different disc.
■
For a DVD, check its region code. Most DVDs have a region code
marked near the center hole. Compare its region code with the
region code for a DVD that plays properly on your projector. The
projector can play DVDs from only one region.
If a disc does not automatically play:
■
A disc automatically starts playing only at the time you close the
tray. If a disc is already loaded in the tray, press the [Play] button
to start playing.
■
Make sure the [Power] button is pressed. If the projector is pow-
ered off, nothing happens to the internal DVD player.
If a disc skips and does not continuously play:
■
Check the DVD player isn’t in [A-B] repeat status.
■
Make sure the disc is completeness, not scratch, dirtiness or warp.
If so, try to clean disc or press [GOTO] button to skip to next chap-
ter or title.
If some images on a CD do not show:
■
Some images with very high resolution (high number of pixels)
cannot be displayed. Convert them to standard format with a lower
resolution.
