Rev. 00
Company Confidential Optoma_______________________ Delta____________
48
2008/07/02
5-5.Starting and Shutting down the Projector
1.
Connect the power cord to the
projector.
2.
Turn On the connected devices.
3.
Ensure the Power LED is steady
(flashing) and then press the Power
button to turn On the projector.
The projector splash screen displays
and connected devices are detected.
If the connected device is a PC, press
the appropriate keys on the computer
keyboard to switch the display output
to the projector. (Check the user
manual of the PC to determine the
appropriate Fn key combination to
change display output.)
4.
If more than one input device is
connected, press the
Source
button
repeatedly to switch among devices.
(DVD and HDTV are supported
through the VGA connector)
5.
To turn off the projector, press the
power button. The
Power Off? /
Press Power again
message
appears. Press the
Power
button
again to turn off the projector.
Caution:
Do not unplug the power cord until the Lamp LED (on Cooling mode) stops flashing–indicating
the projector has cooled down.
