H79
2-5
1.
Unplug 9 connector cables and unscrew 2 screws to remove Thermal Board.
2-3
Removing Thermal Board, Main Board,
Connector Board and Power Module
2.
Unscrew 4 screws to remove Connector Board.
Unscrew 9 hex, unplug one connector cable and one FPC cable to remove Main Board.
3.
Unscrew 8 screws and unplug 3 connector cable to remove Power Module.
Power Module
Connector Board
connector
cable
FPC
cable
Summary of Contents for H79
Page 20: ...H79 2 12 7 Unscrew one screw to remove Thermal Switch ThermalSwitch ...
Page 42: ...H79 6 3 6 3 EDID Upgrade Procedure 1 Execute EDID program 2 Press Mode button ...
Page 46: ...H79 6 7 9 Themessagesof OK andthe DigitalValues will show ...