9
NOTE:
Consult your source device’s user manual for instructions on activating
Bluetooth.
Pairing additional devices with your BE Free6
To pair additional devices to your BE Free6 ensure that your BE Free6 is
not connected to any device then repeat the steps 1,2,3 outlined above.
Note:
A.
Your BE Free6 can store pairing information for up to eight devices. If
your BE Free6 have already been paired with eight devices and a ninth
device is paired, the stored information for the very first device will be
deleted.
B.
If the earbud is left inactive in pairing mode, your BE Free6 will
automatically power off after 6 minutes.
Switching between Stereo mode and Mono mode
When you are switching between stereo mode and mono mode, an easy
way to revert back to stereo mode is to place both earbuds back into the
charging case. Once charging status is activated with orange LED lights,
please remove both earbuds to revert back to stereo mode.
The BE Free6 default setting will enable stereo mode as per factory
preset. Should you wish to utilize mono mode, please connect/pair the
left earbud to a Bluetooth-enabled device while the right earbud is
powered off (or charging within the charging case). Once paired, follow
similar steps to connect the right earbud to a second Bluetooth-enabled
device.
Summary of Contents for NuForce BE Free6
Page 1: ...1 ...
