93
English
Appendices
Installing and Cleaning the Dust
Filter
Dust filters are
only required/
supplied in
selected regions
with excessive
dust.
We recommend you clean the dust filter every 500 hours of
operation, or more often if you are using the projector in a
dusty environment.
When the warning message appears on the screen, do the
following to clean the air filter:
1
1
2
2
1. Switch off the power to the projector by pressing the “ ” button on the remote
control or on the Control Panel of the projector.
2. Disconnect the power cord.
3. Pull out the latch to remove the dust filter compartment, as shown in the illustration.
1
4. Carefully remove the air filter. Then clean or replace the dust filter.
2
To install the dust filter, reverse the previous steps.
5. Turn on the projector and reset the filter usage counter after the dust filter is
replaced.
Air Filter Cleaning Procedure:
The usage time of the dust filter is reched.
Please clean the dust filters for better performance.
