WS-9211G User Manual
Optoma Corp.
PC’s IP address get from WS-9211G automatically.
♦
In this mode, WS-9211G provide DHCP server capability.
♦
You can’t connect to office network through WS-9211G’s LAN port
because the LAN port is disabled.
< IP Setup>
♦
IP Address: The default value is 192.168.100.10.
♦
Subnet Mask: The default value is 255.255.255.0
<DHCP Server Setup>
♦
Start IP: The start IP address of DHCP Server.
♦
End IP: The end IP address of DHCP Server.
♦
Default Gateway: The default value is 192.168.100.10
< Wireless Setup>
♦
SSID: SSID string, max. length is 32 bytes.
♦
Channel: to set fixed channel or Auto. The “Auto” means after power on
WS-9211G, it will scan all of wireless channel and select clear one channel
automatically.
♦
WEP: you can Disable WEP key or select one of 64bit or 128bit in ASCII or
HEX string..
♦
Key: If WEP is enabled, you have to set key value according to WEP mode
you selected.
<Apply >:
press button to select this mode
<Cancel> :
press button to abort action
.
<Back>:
Back to Operating mode main menu
2.
[ Hybrid Mode ]
-
-
17
