optris LS – E2006-01-A
32
Device Setup
The button
Setup [Menu: Device\ Setup]
opens a dialog
window for setting up the following parameters of the LS:
Emissivity Backlight
High alarm
Laser
Low alarm
Buzzer
Ext. Ambient Temp.
Lock mode
Temperature unit Flip
mode
The first activation of
Ext. Ambient Temp.
will initiate this
feature inside the LS unit. From this time the feature will
appear in the
Setup Menu 2
on the unit, also if deactivated
again in the device setup
[
►
Ambient Temperature Compensation]
.
A reset of the unit to the factory default values
[
►
Reset]
will delete the display of this function during operation
[Setup Menu 2]
.
To load the factory default settings into the unit please press the
Factory Default
button (same functionality as
►
Reset
). An additional query avoids a reset of the unit by mistake.
A change of parameters will be taken over from the connected unit
immediately
and vice versa.
Summary of Contents for LaserSight
Page 1: ...optris LaserSight Operators manual...
Page 2: ......
