7
Figure 15. a)
The 8x50 right-angle correct-image finder
scope.
b)
Insert the bracket foot into the finder scope
dovetail shoe and lock with the thumbscrew.
Figure 14.
Lift the tube and lower the side bearings into
the indentations in the side panels, as shown. They should fit
snugly.
a)
b)
c)
Figure 13. a)
Remove the two screws in the side hub with the Allen wrench.
b)
Then align the side bearing with the slot
in the hub and install with the screws, top screw first.
c)
Align the top of the side bearing with the “0” on the scale before
tightening the screws.
Flat surface
faces up
Flat surface
faces up
Align top of
side bearings
with “0”
a)
Lock ring
Objective
lens cell
b)
