7
User’s guide CS 2205
Heath & Safety precautions:
• Before using, the equipment please read the Health & Safety precautions,
manufacturers’ recommendations and the operating manual.
• The operating manual should be available at all times for the operator to read.
• The equipment can only be used in accordance with the specifications in the user
guide/manual.
• The equipment should be installed on a sturdy and level surface near a 220 to 240 V AC
socket.
• The equipment the socket should be earthed in accordance with electrical regulations.
• The equipment must be protected against moisture and dust.
• Do not put the equipment near heating or ventilation units.
• The equipment must not be used in or near a room with inflammable liquids or gases.
• Do not use the equipment near aerosols of, oil or grease made from petroleum
or inflammable substances.
• Do not use compressed air from a aerosol for clearing shredder.
• The power supply cable should be protected against any damage and not be used to pull
the equipment or to remove the plug from the power socket.
• Unplug the equipment from the power socket when removing the cover or cleaning the inside.
• The equipment should be kept away and out of reach of children and animal’s.
• Danger! Equipment contains rotary elements. Keep away, long hair, loose jewellery, ties
and other loose pieces of clothing as they can become entangled in the cutting head.
• Be careful when feeding material into the slots.
• When the motor overheats, it will turn off without a single, turn off the main switch
of the shredder immediately and wait for it to cool down!
• Do not put any heavy objects on the device!
• When any malfunction occurs, check that the equipment is being used correctly and then
contact the dealer or service point.
• The equipment must not be put or kept outside and should be operated in a room
temperature higher than +8°C.
• The equipment should be operated accordance to the general Health & Safety rules.
• Any repairs must be carryout by only authorised staff.
• After using the shredder, it must be turned off by the main switch or by unplugging it from
the power socket.
Recommendations:
• The equipment was designed for shredding paper only.
• During longer none operation, the mains switch should be turned “OFF’ and unplugged.
• Before shredding, you must remove paper clips and staples from the documents.
• Empty the shredded waste from the bin frequently.
• The shredder can only be operated with the original paper bin supplied.
• ensure long and faultless use of the equipment do not shred more than 5 sheets
of 80 gram/m² paper at one time.
• Do not shred computer continues printout paper, PVC foil, coated paper or cardboard
as it can damage of cutting knifes and mechanism and over load the electric motor.
NOTE! Not complying with the recommendations above can
result in the warranty / guarantee being void.
