Opus CS 2208 AF, User Manual

1

• Before using, the equipment please read the Health & Safety precautions, manufacturers’
  recommendations and the operating manual.
• The operating manual should be available at all times for the operator to read.
• The equipment can only be used in accordance with the specifications in the user 
  guide/manual.
• The equipment should be installed on a sturdy and level surface near a 230 V / 50 Hz socket.
• The equipment the socket should be earthed in accordance with electrical regulations.
• The equipmentmust be protected against moisture and dust.
• Do not put the equipment near heating or ventilation units.
• The equipment must not be used in or near a room with inflammable liquids or gases.
• Do not use the equipment near aerosols of, oil or grease made from petroleum or inflammable
  substances.
• Do not use compressed air from a aerosol for clearing shredder.
• The power supply cable should be protected against any damage and not be used to pull the
  equipment or to remove the plug from the power socket.
• Unplug the equipment from the power socket when removing the cover or cleaning the inside.
• The equipment should be kept away and out of reach of children and animal’s.
• Danger! Equipment contains rotary elements. Keep away, long hair, loose jewellery, ties and  

other loose pieces of clothing as they can become entangled in the cutting head.

• Be careful when feeding material into the slots.
• When the motor overheats, it will turn off without a single, turn off the main switch of the 

shredder immediately and wait for it to cool down!

• Do not put any heavy objects on the device!
• When any malfunction occurs, check that the equipment is being used correctly and then 
  contact the dealer or service point.
• The equipment must not be put or kept outside and should be operated in a room temperature
   higher than +8°C.
• The equipment should be operated accordance to the general Health & Safety rules.
• Any repairs must be carryout by only authorised staff.
• After using the shredder, it must be turned off by the main switch „Power” or by unplugging it 

from the power socket.

HEALHT & SAFETY PRECAUTIONS

2

RECOMMENDATIONS AND REQUIREMENTS

• The equipment was designed for shredding paper, credit cards and CD/DVDs.
• During longer none operation, the mains switch „Power” should be turned “OFF”. Green LED 
  light goes off.
• Before shredding, you must remove paper clips and staples from the documents.
• Empty the shredded waste from the bin frequently.
• The shredder can only be operated with the original paper bin supplied.
• To ensure long and faultless use of the equipment do not shred more than 8 sheets of 
  80 gram/m

2

 paper, 1 plastic credit card or 1 CD/DVD at one time.

• Do not shred computer continues printout paper, PVC foil, coated paper or cardboard as it can
  damage of cutting knifes and mechanism and over load the electric motor.

NOTE! Not complying with the recommendations above can result, with the 
guarantee/warranty being made void.

6