Possible malfunctions
Malfunction
Possible Cause
Remedy
Equipment does
not start after
inserting paper into
the slot
1. Not plug in properly
2. Pages to be shred are too soft
3. Overheating
4. Paper jam
5. The basket is not installed
properly
1. Plug the equipment in correctly
2. Fold pages or insert more paper in the feed
opening
3. Turn off the shredder, wait about 50 min
Check overheat symbol
4. Remove stuck paper
5. Install shred bin correctly
Equipment does not
stop after shredding
Photo cell in the entry slot is
covered by scraps of paper
Clean the photo cell
The shredder
operates too loud
Equipment is not on sturdy and level
floor
Place the machine on study and level floor
and lock front wheels
The shredder does
not operate
correctly
1. Too many pages inserted into the
feed opening
2. Too big paper format
3. Paper is not inserted in the centre
of feed opening
1. Reduce number of pages inserted to the slot at
one time
2. Switch to REV button to remove paper and insert
folded pages once again
3. Insert paper in the middle of the feed opening
Technical Data:
Shredder type:
cross-cut
Feed opening:
1 off 220mm / 1 off, 122mm CD/DVD & Credit card
Performance:
12 sheets paper of 80g/m² or
1 credit card or 1 CD/DVD
Shred size:
4 x 35mm
Waste bin:
25 Litre
Voltage:
220-240 Volt 50-60 Hz
Input current:
1,8 Amps
Net weight:
6,7 kg
Dimensions:
367 x 251 x 464 mm
