Opus ProfiLAM A2, User Manual

1

· Before operating the equipment please read the Health & Safety precautions, 

  manufacturer’s recommendations and the operation manual.
· The operation manual should be easily available at any time for the operator.
· The equipment must be installed on a sturdy level surface near a 230 V, AC 50 Hz, 

  correctly earth socket.
 

· The equipment:

    · must be protected against dust and moisture.

    · should be operated according to the general HEALTH AND SAFETY rules.

    · must not be placed near the heating units or ventilation units.

    · must not be used in vicinity of inflammable liquids or gases.

    · do not put anything on top off the equipment.

    · the power supply cable must be protected against damage.

    · must not be used to pull or move the equipment or to remove the plug 

       from the socket.

    · during a long standstill or before moving the equipment, the plug 

      should be removed from a mains socket.

    · must be kept away and out of reach of children and animal’s.

    ·  must not be located outside, should be operated in room temperature 

       higher than +8

0

C.

· Danger! Equipment contains rotary elements. Ensure that long hair, loose 
   jewellery, ties and other loose pieces of clothing are kept away from the slot, 
   AS they can be pulled into the slot and get entangled into the rollers!
· Danger! Equipment contains heated rollers, pay special attention. Do not touch the 
   cover or put any inflammable materials on the top of the equipment or cover 

   the grill!

· After using the laminator it should be turned off by the main switch and 
  unplugged from the power socket. Do not cover the feed opening or the grill 
  so that the rollers can cool down.

· The equipment must not be used for any other purposes than those indicated 
   in the instruction manual,

· Should there be a malfunction it is necessary to check and supervise if the 
  equipment is being operated correctly, then contact the service team.
· Before removing any cover from the equipment, remove the plug from the socket.

· Using inappropriate lubricants can cause a fire hazard.
· Should there be any bad smells unplug immediately and call the service team.

· Any repairs during the Guarantee period must be carried out by authorised staff. 
  Failure to do so could void the Guarantee.
· There are high voltage parts and moving elements inside this equipment. To avoid 

  electric shock or accidents, do not open the cover without unplugging the cable from 
  the main socket.

HEALTH & SAFETY PRECAUTIONS

8