Healht & Safety precautions:
●
Before using, the equipment please read the Health & Safety precautions, manufacturers’
recommendations and the operating manual.
●
The operating manual should be available at all times for the operator to read.
●
The equipment, can only be used in accordance with the specifications in the user guide/manual.
●
The equipment should be installed on a sturdy and level surface near a 220 to 240 V AC socket.
●
The equipment socket should be earthed in accordance with electrical regulations.
●
The equipment must be protected against moisture and dust.
●
Do not put the equipment near heating or ventilation units.
●
The equipment must not be used in or near a room with inflammable liquids or gases.
●
Do not use the equipment near aerosols of, oil or grease made from petroleum or inflammable
substances.
●
Do not use compressed air from a aerosol for clearing shredder it could have inflammable gases.
●
The power supply cable should be protected against being damaged and not be used to pull the
equipment or to remove the plug from the power socket.
●
Unplug the equipment from the power socket when removing the cover or cleaning the inside.
●
The equipment should be KEPT AWAY and out of reach of children and animal’s.
●
Danger! Equipment contains rotary elements. KEEP AWAY from, long hair, loose jewellery, ties and
other loose pieces of clothing as they can become entangled in the cutting heads.
●
Be careful when feeding material into the slots.
●
When the motor overheats, it will turn off without a single, turn off the main switch of the shredder
immediately and wait for it to cool down!
●
Do not put any heavy objects on the device!
●
When any malfunction occurs, check that the equipment is being used correctly and then contact
the dealer or service point.
●
The equipment must not be put or kept outside and should be operated in a room temperature
higher than +8°C.
●
The equipment should be operated in accordance with the general Health & Safety rules.
●
Any repairs must be carried out by only authorised staff during the guarantee / warranty period.
●
After using the shredder, it must be turned off by the main switch on the equipment or by
unplugging it from the power socket.
Recommendations and requirements:
●
The equipenemt was designed for shredding paper, credit card and CD/DVDs
●
During longe none operation, the mains switch should be turned OFF and unplugged
●
Empty the shredded waste from the bin frequently
●
Before shredding, you must remove paper clips and stales the documents
●
The shredder can only be operated with the original paper bin supplied
●
Pay attention during fitting the cutting head to the bin. Improper fitting will cause a malfunction in
the operation of shredder or damage sensor and the tab on the bin
●
To ensure long and faultless use of the shredder do not shred more than 7 sheets of 70 g/m2 or
one plastic card one CD at one time
●
Do not shred computer printout paper, PCV foil, coated paper, card or carboard - it can blunt the
blades and cause damage to the cutting mechanism
●
NOTE! Desk - side shredders are not designed for continuous operation. It is recommended to
make at least 4 minutes breake after every 2 minutes of shredding. Overloading the shredder may
cause it temporary switch off. Multiple overloads may cause permament damage of shredder
7
User’s guide VS 711 CD
