NOVA Version 1.0
Page 23 of 34
NOVA
Voice Evacuation System
-
Neighboring mode:
This mode is used for Emergency functions, and it permits to broadcast
ALERT
and
EVAC
messages sequentially to different zones.
EVAC
message will be broadcasted by the zone
corresponding to input contact (Ex: contact 3 makes evac message to be broadcasted by
zone 3) and
ALERT
message will be broadcasted by previous and next zones according to
‐
(0~4)
and
+(0~4)
numbers. (Ex:
‐(0~4)
set to 2 and
+(0~4)
set to 1, contact input 3 activates
EVAC
message to zone 3 and
ALERT
message to zone 1, 2 and 4.). In this mode you can also
select the play method, you can select message repetitions with
Specifies the number of
playback
and
Number of playback (1~100)
or the time with
Specifies the time to play
and
Play time (5‐300s)
.
5.3.7.
Group configuration
This menu is used to create zone groups.
There are 120 groups available which can be configured with different zones of the system. These
groups are only used to operate the system from the Software
State and Control
menu.
5.3.8.
Import
This menu is used to Import system configuration.
The file to import must be exported from the software or extracted from the memory card. It is a
*.cfg file. Press
, select the file location and press
Open
, the file will be automatically loaded in
the system.
Note: only configuration file is imported, audio messages are not included.
